Transfer Assembly Installation


  1. INSTALL TRANSFER ASSEMBLY

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER

  3. INSTALL MANUAL TRANSMISSION WITH TRANSFER

  4. ADD TRANSFER OIL

  5. CHECK FOR TRANSFER OIL LEAK

Transfer Assembly -- Installation



1. INSTALL TRANSFER ASSEMBLY

  1. Install the transfer assembly with the 8 bolts and bracket.

    Torque:
    24 N*m{245 kgf*cm, 18 ft.*lbf}
    NOTICE:
    Take care not to damage the adaptor rear oil seal with the transfer input gear spline.


2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER
  1. for A750F: LandCruiser RM0000013F4022X.html
  2. for AC60F (1GR-FE): LandCruiser RM0000018ZB05LX.html
  3. for AC60F (1GD-FTV): LandCruiser RM0000013F4023X.html
  4. for AC60F (2TR-FE): LandCruiser RM000000NR8058X.html


3. INSTALL MANUAL TRANSMISSION WITH TRANSFER
  1. for G52F: LandCruiser RM0000048B200AX.html
  2. for R150F: LandCruiser RM0000011B001TX.html
  3. for RA61F (1GR-FE): LandCruiser RM00000178Q013X.html
  4. for RA61F (1KD-FTV): LandCruiser RM00000178Q014X.html
  5. for RA61F (1GD-FTV): LandCruiser RM00000178Q015X.html


4. ADD TRANSFER OIL

  1. Remove the filler plug and gasket.

  1. Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

    NOTICE:
    1. Add oil slowly.
    2. Add oil a little at a time, waiting several minutes between each addition of oil.

  1. Wait approximately 5 minutes and check that the oil level has not changed.

  1. Install a new gasket to the filler plug and then tighten the plug.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}


5. CHECK FOR TRANSFER OIL LEAK