Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40
Wireless Door Lock Control System (W/O Entry And Start System) -- Problem Symptoms Table |
If a normal system code is displayed during the DTC check, but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting page.
- HINT:
- The following is the troubleshooting procedure for the wireless door lock control of a vehicle without the entry and start system.
- Inspect the fuse and relay before investigating the suspected areas shown in the table below.
- Inspect each malfunction circuit in numerical order for its corresponding symptom.
| Symptom | Suspected Area | See page |
| The wireless door lock control system does not operate. | 1. Perform the operation check | CAMRY_ACV40 RM000001NMX002X.html |
| 2. Door control transmitter | CAMRY_ACV40 RM000000VNY002X.html | |
| 3. Enter the self-diagnostic mode | CAMRY_ACV40 RM000001NN6002X.html | |
| 4. If the recognition code does not match the key code, check that the key code can be registered in the rewrite or add mode of the recognition code registration | - | |
| 5. Unlock warning switch circuit | CAMRY_ACV40 RM00000144J021X.html | |
| 6. Door courtesy switch circuit | CAMRY_ACV40 RM0000011T3028X.html | |
| 7. Luggage compartment door courtesy switch circuit | CAMRY_ACV40 RM00000245F002X.html | |
| 8. If the symptoms still occur after the above areas have been inspected and proved to be normal, replace the main body ECU (Instrument Panel J/B) | - | |
| The automatic lock function does not operate normally. | 1. Perform the operation check | CAMRY_ACV40 RM000001NMX002X.html |
| 2. Unlock warning switch circuit | CAMRY_ACV40 RM00000144J021X.html | |
| 3. Door courtesy switch circuit | CAMRY_ACV40 RM0000011T3028X.html | |
| 4. If the symptoms still occur after the above areas have been inspected and proved to be normal, replace the main body ECU (Instrument Panel J/B) | - | |
| The illuminated entry function only does not operate. | 1. Perform the operation check | CAMRY_ACV40 RM000001NMX002X.html |
| 2. Lighting system | CAMRY_ACV40 RM000002CE201SX.html | |
| 3. If the symptoms still occur after the above area has been inspected and proved to be normal, replace the main body ECU (Instrument Panel J/B) | - | |
| The answer back function does not operate (Hazard warning light). | 1. Perform the operation check | CAMRY_ACV40 RM000001NMX002X.html |
| 2. Lock position switch circuit | - | |
| - Driver door | CAMRY_ACV40 RM000000WL200BX.html | |
| - Front passenger door | CAMRY_ACV40 RM00000121V00AX.html | |
| - Rear passenger door LH | CAMRY_ACV40 RM00000121W01CX.html | |
| - Rear passenger door RH | CAMRY_ACV40 RM00000121X01CX.html | |
| 3. Wire harness | - | |
| 4. Turn signal flasher | CAMRY_ACV40 RM000001ZTV002X.html | |
| 5. If the symptoms still occur after the above areas have been inspected and proved to be normal, replace the main body ECU (Instrument Panel J/B) | - | |
| The wireless trunk opener function only does not operate. | 1. Perform the operation check | CAMRY_ACV40 RM000001NMX002X.html |
| 2. Unlock warning switch circuit | CAMRY_ACV40 RM00000144J021X.html | |
| 3. Luggage compartment door courtesy switch circuit | CAMRY_ACV40 RM00000245F002X.html | |
| 4. If the symptoms still occur after the above areas have been inspected and proved to be normal, replace the main body ECU (Instrument Panel J/B) | - |