Свеча Накаливания - Установка
Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА ЗАПУСКА ДВИГАТЕЛЯ 5L-E
INSTALL GLOW PLUG ASSEMBLY
INSTALL NO. 1 GLOW PLUG CONNECTOR
CONNECT VENTILATION HOSE
INSTALL INTAKE PIPE
INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
СВЕЧА НАКАЛИВАНИЯ - УСТАНОВКА
| 1. INSTALL GLOW PLUG ASSEMBLY |
Using a 12 mm deep socket wrench, install the 4 glow plugs.
- Момент затяжки:
- 13 N*m{ 130 kgf*cm, 10 ft.*lbf}
| 2. INSTALL NO. 1 GLOW PLUG CONNECTOR |
Install the No. 1 glow plug resistor insulator and No. 1 glow plug connector.
Install the glow plug connector with the 4 nuts. Uniformly tighten the nuts.
- Момент затяжки:
- 1.0 N*m{ 10 kgf*cm, 9 in.*lbf}
| *1 | Nut |
| *2 | Washer |
| *3 | No. 2 Glow Plug Resistor Insulator |
| *4 | Engine Wire |
| *5 | No. 1 Glow Plug Connector |
| *6 | No. 1 Glow Plug Resistor Insulator |
| *7 | Bolt |
Install the 4 screw grommets.
Connect the engine wire and install the No. 2 glow plug resistor insulator and washer with the bolt.
- Момент затяжки:
- 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}
| 3. CONNECT VENTILATION HOSE |
Connect the ventilation hose.
| 4. INSTALL INTAKE PIPE |
Install the intake pipe with the 2 bolts and tighten the hose clamp.
- Момент затяжки:
- for bolt:
- 18 N*m{ 184 kgf*cm, 13 ft.*lbf}
- for clamp:
- 6.0 N*m{ 61 kgf*cm, 53 in.*lbf}
| 5. INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY |
Вставьте петли крышки воздушного фильтра и шланг в корпус воздушного фильтра, а затем закрепите 4 откидных защелки.
Установите крышку воздушного фильтра и закрепите ее зажимом.
- Момент затяжки:
- 5,0 N*m{ 51 kgf*cm, 44 in.*lbf}
Закрепите зажим жгута проводов.
Подсоедините 2 зажима и разъем.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- ПРИМЕЧАНИЕ:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
