Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) - INSTALLATION

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL REAR SEAT LOCK STRIKER SUB-ASSEMBLY

Install the 4 seat lock strikers with 8 bolts.

  • Torque:
  • 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Return the floor carpet to its original position.

2. INSTALL NO. 3 SEAT CUSHION COVER

Attach the 16 claws and 4 clips to install the 4 seat cushion covers.

3. INSTALL FOLD SEAT LEG LOCK SUB-ASSEMBLY

Install the fold seat leg lock with the 2 nuts.

  • Torque:
  • 12 N*m{ 122 kgf*cm, 9 ft.*lbf}

Attach the 2 cable clamps.

4. INSTALL REAR ROOF NO. 1 AIR DUCT (w/ Rear Air Conditioning System)
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the duct with the clip.

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cooler plate.

5. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

Attach the 4 claws to install the seat lock control lever.

6. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

w/ Sliding Roof:


Install the front quarter trim panel assembly LH ().

w/o Sliding Roof:


Install the front quarter trim panel assembly LH ().

7. INSTALL REAR SEAT COVER CAP
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
  • HINT:
  • Use the same procedure to install the rear seat cover cap on the other side.

Attach the 3 claws to install the rear seat cover cap.

8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 6 clips to install the support plate.

9. INSTALL REAR DOOR SCUFF PLATE LH
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws and 4 clips to install the scuff plate.

Install the screw.

10. INSTALL REAR STEP COVER
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
  • HINT:
  • Use the same procedure to install the step cover on the other side.

Attach the 2 claws to install the step cover.

11. INSTALL REAR NO. 2 SEAT ASSEMBLY
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Temporarily install the seat assembly with the 4 bolts.

  • NOTICE:
  • Be careful not to damage the vehicle body.

Tighten the bolts in the order shown in the illustration.

  • Torque:
  • 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
12. INSTALL REAR NO. 2 SEAT HINGE COVER LH

Attach the clip and 2 claws to install the cover.

13. INSTALL REAR SEAT CUSHION HINGE COVER LH

Attach the 3 claws to install the cover.

Return the seat to the upright position.

14. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)