Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type) - DISASSEMBLY
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY |
Using a screwdriver, remove the 2 E-rings.
Remove the 2 hinge pins.
Remove the 2 seat leg plates.
Remove the seat cushion leg with the spring.
Remove the spring from the seat cushion leg.
| 2. REMOVE REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH |
Remove the hog rings.
Open the 2 fasteners, and then remove the seat cushion cover.
| 3. REMOVE REAR SIDE SEAT CUSHION PAD LH |
| 4. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH |
Remove the hog rings.
Pass the side seat band into the seatback cover.
Remove the seatback cover.
| 5. REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY |
Remove the screw and seat band.
| 6. REMOVE REAR SIDE SEATBACK PAD LH |
Remove the hog rings and seatback pad.