KNEE AIRBAG ASSEMBLY (for Front Passenger Side) - REMOVAL

Use the same procedures for the RHD and LHD.

The procedures listed below are the LHD side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

2. REMOVE FRONT DOOR SCUFF PLATE RH

3. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

Put protective tape around the No. 1 instrument panel finish panel cushion.

Text in Illustration
*1	Protective Tape

Using a moulding remover, detach the 7 claws and remove the No. 1 instrument panel finish panel cushion.

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Remove the clip and screw.

Detach the 7 claws and remove the lower instrument panel pad sub-assembly.

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

Detach the 4 claws and remove the No. 2 instrument panel under cover.

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

Remove the 4 bolts.

Detach the 4 claws and remove the front passenger side knee airbag.

Disconnect the connector.

When handling the airbag connector, take care not to damage the airbag wire harness.

Knee Airbag Assembly (For Front Passenger Side) - Removal