Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY AND BODY GROUND)
REAR SEAT ENTERTAINMENT SYSTEM - Television Display Power Source Circuit
DESCRIPTION
This is the power source circuit of the television display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
| 1.CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY AND BODY GROUND) |
Disconnect the L53 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition L53-3 (GND) - Body ground Always Below 1 Ω L53-4 (GND2) - Body ground Always Below 1 Ω
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Condition Specified Condition L53-11 (+B2) - Body ground Always 11 to 14 V L53-1 (+B) - Body ground Always 11 to 14 V
| *a | Front view of wire harness connector (to Television Display Assembly) |
|
| ||||
| OK | ||
| ||