REMOVE POWER STEERING SUCTION PORT UNION

REMOVE FLOW CONTROL VALVE

REMOVE VANE PUMP GEAR

REMOVE REAR VANE PUMP HOUSING

REMOVE VANE PUMP ROTOR, 10 VANE PUMP PLATES AND VANE PUMP CAM RING

REMOVE VANE PUMP FRONT SIDE PLATE

REMOVE VANE PUMP SHAFT WITH VANE PUMP SHAFT BEARING

REMOVE VANE PUMP SHAFT BEARING

REMOVE VANE PUMP HOUSING OIL SEAL

Remove the bolt and suction port union from the vane pump.

Using a screwdriver, remove the O-ring from the suction port union.

Remove the pressure port union.

Remove the O-ring from the pressure port union.

Remove the flow control valve and compression spring.

Using soft jaws on a vise, clamp the vane pump.

• NOTICE:

• Be careful not to damage the vane pump.

Using SST, remove the gear.

• SST
• 09950-30012(09951-03010,09953-03010,09954-03010,09955-03011)

Remove the 4 bolts and rear housing from the front housing.

Using a screwdriver, remove the O-ring from the rear housing.

• HINT:

• Tape the screwdriver tip before use.

Remove the 10 vane pump plates.

• NOTICE:

• Take care not to drop the vane pump plates.

Remove the rotor.

Remove the cam ring from the front housing.

Remove the front side plate from the front housing.

Using a screwdriver, remove the O-ring from the front side plate.

• HINT:

• Tape the screwdriver tip before use.

Remove the O-ring from the front housing.

Using a screwdriver, remove the snap ring.

• NOTICE:

• Be careful not to damage the front housing.

• HINT:

• Tape the screwdriver tip before use.

Tape the serrated part of the vane pump shaft.

Using a press, press out the shaft with bearing.

Using 2 screwdrivers, remove the snap ring from the shaft.

• NOTICE:

• Be careful not to damage the shaft.

Using a press, press out the bearing from the shaft.

Using a screwdriver, pry out the oil seal.

• NOTICE:

• Be careful not to damage the front housing.

• HINT:

• Tape the screwdriver tip before use.