VANE PUMP (for 3UR-FE) - REMOVAL

1. PRECAUTION

NOTICE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

3. REMOVE FRONT WHEEL RH

4. REMOVE FRONT FENDER APRON TRIM PACKING A

Vane Pump (For 3Ur-Fe) - Removal. POWER ASSIST SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a clip remover, remove the 3 clips and fender apron seal.

5. REMOVE V-BANK COVER SUB-ASSEMBLY

Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Text in Illustration
*1	Bracket
*2	Hook
*3	Pin
*4	Grommet

6. REMOVE AIR CLEANER HOSE ASSEMBLY

Disconnect the vacuum hose and No. 2 ventilation hose.

Loosen the 2 hose clamps.

Remove the air cleaner hose.

7. REMOVE AIR CLEANER ASSEMBLY

Remove the 3 bolts and air cleaner.

8. REMOVE FAN AND GENERATOR V BELT

While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.