Tire Pressure Warning Receiver - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - TIRE PRESSURE MONITORING

TIRE PRESSURE WARNING RECEIVER - INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

Connect the connector to the tire pressure warning ECU and receiver.

Attach the guide and clamp to temporarily install the tire pressure warning ECU and receiver.

Tire Pressure Warning Receiver - Installation. TIRE PRESSURE MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the bolt.

  • Torque:
  • Bolt A:
  • 13 N*m{ 127 kgf*cm, 9 ft.*lbf}
  • Bolt B:
  • 8.3 N*m{ 85 kgf*cm, 73 in.*lbf}
Text in Illustration
*aBolt A
*bBolt B
  • NOTICE:
  • The different marks on the heads of the bolts are shown in the illustration. Check whether the bolt being used is bolt A or bolt B, and then tighten the bolt using the appropriate torque.
2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
w/o Sliding Roof: ()
w/ Sliding Roof: ()
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
4. REGISTRATION OF TRANSMITTER ID

()


5. INSPECT TIRE PRESSURE WARNING SYSTEM

()


6. PERFORM INITIALIZATION

()