Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DRIVE SHAFT / PROPELLER SHAFT
FRONT DRIVE SHAFT ASSEMBLY - REMOVAL
- HINT:
| 1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.
| 2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Remove the 3 bolts and 2 screws.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.
| 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 10 bolts and No. 1 engine under cover.
| 4. REMOVE NO. 2 ENGINE UNDER COVER |
Remove the 10 bolts and No. 1 engine under cover.
| 5. DRAIN DIFFERENTIAL OIL |
Stop the vehicle on a level place.
for Front Differential:
Remove the engine under cover.
Using a 10 mm hexagon wrench, remove the filler plug and gasket.
Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.
Using a 10 mm hexagon wrench, install a new gasket and the drain plug.
- Torque:
- 39 N*m{ 400 kgf*cm, 29 ft.*lbf}
for Rear Differential:
Remove the filler plug and gasket.
Remove the drain plug and gasket, and drain the oil.
Install a new gasket and the drain plug.
- Torque:
- 49 N*m{ 500 kgf*cm, 36 ft.*lbf}
| 6. REMOVE FRONT AXLE ASSEMBLY LH |
()
| 7. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH |
Using SST, remove the drive shaft.
- SST
- 09520-01010
09520-24010(09520-32040)
- NOTICE:
- Be careful not to damage the dust cover and oil seal.