Fuel Sender Gauge Assembly (For 4Gr-Fse) Inspection

Disconnect the fuel sender gauge connector.

Inspect the fuel sender gauge assembly (main).

1. Remove the fuel sender gauge assembly (main).
   

2. Check that the float moves smoothly between F and E.
   

3. Measure the resistance between terminals 2 (S) and 3 (FE) of the connector according to the value(s) in the table below.
   

   Standard resistance:

   Fuel Sender Gauge Assembly (Main):

   Float Level	Resistance (Ω)
   F	6.5 to 8.5
   Between E and F	6.5 to 242.6 (Gradually changes)
   E	237.6 to 242.6

Inspect the fuel sender gauge assembly (sub).

Remove the fuel sender gauge assembly (sub).

Check that the float moves smoothly between F and E.

Measure the resistance between terminals 1 (FS) and 2 (E) of the connector according to the value(s) in the table below.

Standard resistance:

Fuel Sender Gauge Assembly (Sub):

Float Level	Resistance (Ω)
F	6.5 to 8.5
Between E and F	6.5 to 171.9 (Gradually changes)
E	167.9 to 171.9

HINT:

If the value is not as specified, replace the fuel sender gauge assembly.