INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)
INSTALL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY (w/o Headlight Cleaner System)
INSTALL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)
FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
Front Washer Motor -- Installation |
1. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System) |
Install the headlight cleaner motor and pump assembly.
![]() |
2. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Install the windshield washer motor and pump assembly.
![]() |
3. INSTALL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY (w/o Headlight Cleaner System) |
Install the windshield washer jar and pump assembly with the 3 bolts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
![]() |
Install the upper part of the windshield washer jar and pump assembly to the windshield washer jar and pump assembly.
![]() |
Install the bolt.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
Connect the 2 connectors.
4. INSTALL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY (w/ Headlight Cleaner System) |
Install the windshield washer jar and pump assembly with the 3 bolts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
![]() |
Install the upper part of the windshield washer jar and pump assembly to the windshield washer jar and pump assembly.
![]() |
Install the bolt.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
Connect the headlight cleaner hose to the windshield washer jar and pump assembly.
![]() |
Connect the 4 connectors.
5. FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
Connect the washer hose to the windshield washer motor and pump assembly and fill the washer jar with washer fluid.
![]() |
6. INSTALL NO. 3 COOL AIR INTAKE DUCT SUB-ASSEMBLY |
Install the No. 3 cool air intake duct sub-assembly with the 2 bolts and the screw.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
![]() |
Engage the engine under cover clip.
![]() |
Install the 3 front fender liner LH screws.
![]() |
7. INSTALL HEADLIGHT ASSEMBLY LH |
Install the headlight assembly with the headlight bracket pin.
![]() |
Install the 3 bolts.
Connect the connector.
8. INSTALL FRONT BUMPER ASSEMBLY |
9. INSTALL FRONT UPPER FENDER PROTECTOR LH |
Engage the claw and the 3 clips, then install the front upper fender protector LH.
![]() |
Engage the clip on the rubber portion of the cowl top ventilator louver sub-assembly to the front fender protector upper LH.
10. INSTALL ENGINE ROOM SIDE COVER LH |
Install the side cover with the 5 clips.
![]() |
11. INSTALL COOL AIR INTAKE DUCT SEAL |
Install the intake duct seal with the 11 clips.
![]() |