Cruise Control Main Switch Removal

Cruise Control System. Lexus Is250, Is220D. Gse20 Ale20
Cruise Control. Lexus Is250, Is220D. Gse20 Ale20

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 2 LOWER STEERING WHEEL COVER

  3. REMOVE NO. 3 LOWER STEERING WHEEL COVER

  4. REMOVE STEERING PAD

  5. REMOVE CRUISE CONTROL MAIN SWITCH

Cruise Control Main Switch -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation (Click here).


2. REMOVE NO. 2 LOWER STEERING WHEEL COVER


3. REMOVE NO. 3 LOWER STEERING WHEEL COVER


4. REMOVE STEERING PAD


    Lexus Is250, Is220D. Gse20 Ale20.Cruise Control.Cruise Control System.Cruise Control Main Switch Removal

  1. Using a "torx" socket wrench (T30), loosen the 2 "torx" screws until the groove along the screw circumference catches on the screw case.



    Lexus Is250, Is220D. Gse20 Ale20

  1. Pull out the steering pad from the steering wheel assembly and support the steering pad with one hand as shown in the illustration.

    NOTICE:
    When removing the steering pad, do not pull the airbag wire harness.

  1. Disconnect the horn connector.

  1. Disconnect the 2 connectors from the steering pad.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the steering pad.



5. REMOVE CRUISE CONTROL MAIN SWITCH

  1. Disconnect the connector.



    Lexus Is250, Is220D. Gse20 Ale20

  1. Remove the 2 screws and the cruise control main switch.