Dtc P1615 Communication Error From Distance Control Ecu To Ecm
DESCRIPTION
INSPECTION PROCEDURE
DTC P1615 Communication Error from Distance Control ECU to ECM |
DTC U1101 Lost Communication with Distance Control ECU |
DESCRIPTION
The distance control ECU receives information about the area in front of the vehicle from the millimeter wave radar sensor and then sends a brake control demand signal (deceleration demand) and diagnosis signals, such as millimeter wave radar sensor grime signals or millimeter wave radar sensor malfunction signals, to the ECM.DTC No.
| DTC Detection Condition
| Trouble Area
|
P1615
| While the dynamic radar cruise control is either preparing for operation or operating, if communication data from the distance control ECU is logically inconsistent for a certain amount of time, the ECM records this logical error code
| - Communication circuit
- Distance control ECU (Cruise control ECU)
- ECM
|
U1101
| While the dynamic radar cruise control is either preparing for operation or operating, if communication data from the distance control ECU is invalid for a certain amount of time, The ECM records this communication cut off code
| - Communication circuit
- Distance control ECU (Cruise control ECU)
- ECM
|
INSPECTION PROCEDURE
- HINT:
- This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.
| 1.CHECK CAN COMMUNICATION SYSTEM |
Refer to HOW TO PROCEED WITH TROUBLESHOOTING (Click here).