Brake. Lexus Is250, Is220D. Gse20 Ale20
Brake. Lexus Is250, Is220D. Gse20 Ale20
Vacuum Pump (For 2Ad-Fhv) -- Removal |
1. PRECAUTION |
- HINT:
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
3. REMOVE ENGINE ROOM SIDE COVER LH |
Remove the 4 clips and side cover.
![]() |
4. REMOVE ENGINE ROOM SIDE COVER RH |
Remove the 2 clips and side cover.
![]() |
5. REMOVE NO. 1 ENGINE COVER |
Remove the No. 1 engine cover.
![]() |
6. REMOVE NO. 1 AIR CLEANER INLET |
Remove the bolt, clip and inlet air cleaner.
![]() |
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
- HINT:
8. REMOVE AIR DUCT (w/ Combustion Type Power Heater) |
Remove the clip, clamp, and air duct.
![]() |
9. SEPARATE WIRE HARNESS |
Remove the 3 nuts from the engine.
![]() |
Disconnect the 6 engine room wire harness connectors.
- HINT:
- Allow the separated portion of the engine wire harness to hang downward.
Disengage the 4 clamps.
10. REMOVE UNION TO CHECK VALVE HOSE |
Separate the 2 vacuum hoses.
![]() |
Using pliers, grip the claws of the clip and slide the clip to disconnect the ventilation hose.
Remove the 3 bolts.
![]() |
Using pliers, grip the claws of the 2 clips and slide the 2 clips to disconnect the vacuum hose.
11. REMOVE VACUUM PUMP ASSEMBLY |
Remove the 3 bolts and vacuum pump assembly.
![]() |
Remove the 2 O-rings from the vacuum pump assembly.
![]() |