Pattern Select Switch Inspection
INSPECT PATTERN SELECT SWITCH
Pattern Select Switch -- Inspection |
1. INSPECT PATTERN SELECT SWITCH |
Measure the resistance according to the value(s) in the table below.
Standard resistanceSwitch Condition
| Tester Connection
| Specified Condition
|
Pattern select switch (PWR)
| 3 - 7
| Below 1 Ω
|
Pattern select switch (NORM)
| 3 - 7
| 10 kΩ or higher
|
Press continuously Pattern select switch (SNOW)
| 1 - 3
| Below 1 Ω
|
Release Pattern select switch (SNOW)
| 1 - 3
| 10 kΩ or higher
|
If the resistance value is not as specified, replace the pattern select switch.