Fuel Pressure Pulsation Damper Removal

Engine. Lexus Is250, Is220D. Gse20 Ale20
4Gr-Fse Fuel. Lexus Is250, Is220D. Gse20 Ale20

  1. DISCHARGE FUEL SYSTEM PRESSURE

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

  4. REMOVE FUEL PRESSURE PULSATION DAMPER

Fuel Pressure Pulsation Damper -- Removal



1. DISCHARGE FUEL SYSTEM PRESSURE
HINT:
Click here.


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE V-BANK COVER SUB-ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20

  1. Raise the V-bank cover to disengage the clip on the rear of the cover. Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.


4. REMOVE FUEL PRESSURE PULSATION DAMPER


    Lexus Is250, Is220D. Gse20 Ale20.4Gr-Fse Fuel.Fuel System.Fuel Pressure Pulsation Damper Removal

  1. Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.

    SST
    09612-24014(09617-24011)