Engine. Lexus Is250, Is220D. Gse20 Ale20
2Ad-Fhv Fuel. Lexus Is250, Is220D. Gse20 Ale20
Fuel Supply Pump -- Removal |
| 1. REMOVE ENGINE ASSEMBLY |
- HINT:
| 2. REMOVE NO. 1 FUEL PIPE |
- HINT:
| 3. REMOVE NO. 5 FUEL HOSE |
Using pliers, slide the clip to remove the No. 5 fuel hose.
 |
| 4. REMOVE WIRING HARNESS CLAMP BRACKET |
- HINT:
| 5. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR |
- HINT:
| 6. REMOVE NO. 3 FUEL HOSE |
Using pliers, slide the 2 clips to remove the No. 3 fuel hose.
 |
| 7. REMOVE FUEL TUBE SUB-ASSEMBLY |
Disconnect the exhaust fuel addition injector connector.
 |
Turn the retainer as shown in the illustration.
 |
Disconnect the fuel tube from the exhaust fuel addition injector assembly connector.
 |
Remove the union bolt, gasket and fuel tube.
 |
| 8. REMOVE FUEL INLET PIPE SUB-ASSEMBLY |
- NOTICE:
- After removing the fuel inlet pipe, cover the common rail and supply pump with electrical tape to prevent the entry of dirt.
Remove the nut and 2 fuel pipe clamps.
 |
Using the SST, remove the 2 fuel inlet pipes.
- SST
- 09023-38401
| 9. REMOVE SUPPLY PUMP ASSEMBLY |
Disconnect the suction control valve connector.
 |
Remove the 3 bolts and the No. 1 injection pump protector.
 |
Remove the 2 bolts to remove the supply pump assembly, O-ring and supply pump drive coupling from the cylinder head.
 |
Remove the O-ring from the supply pump.