Dtc 5C-41 Steering Sensor Error
DESCRIPTION
INSPECTION PROCEDURE
CHECK MULTI-INFORMATION DISPLAY
DTC 5C-41 Steering Sensor Error |
DESCRIPTION
DTC No.
| DTC Detection Condition
| Trouble Area
|
5C-41
| - Fail frag is transmitted from steering sensor.
- Fail frag is transmitted from steering control ECU (3UZ-FE Only)
| - Steering sensor
- VGRS system
|
INSPECTION PROCEDURE
1.CHECK MULTI-INFORMATION DISPLAY |
- HINT:
- Only vehicles with 3UZ-FE type engines are equipped with the VGRS system. If this DTC is output in a vehicle with another type of engine, replace the steering sensor.
Check that "CHECK VGRS" is output on the multi-information display.
- Result:
Display (CHECK VGRS output)
| Proceed to
|
CHECK VGRS output
| A
|
No output
| B
|
A |
|
|
|
GO TO VARIABLE GEAR RATIO STEERING SYSTEM |
|