Body Electrical. Lexus Gs430, Gs300. Uzs190 Grs190
Navigation. Lexus Gs430, Gs300. Uzs190 Grs190
CHECK MULTI-DISPLAY POWER SOURCE CIRCUIT
CHECK AVC-LAN CIRCUIT BETWEEN TELEVISION CAMERA ECU AND MULTI-DISPLAY
CHECK TELEVISION CAMERA ECU POWER SOURCE CIRCUIT
DTC 01-D6 No Master (CAMERA) |
DTC 01-D7 Connection Check Error (CAMERA) |
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
| 01-D6 *1 | Component in which this code is recorded was disconnected from system with engine switch on (ACC) or on (IG) Or, when this code was recorded, multi-display was disconnected |
|
| 01-D7 *2 | Component in which this code is recorded was disconnected from system after engine start Or, when this code was recorded, multi-display was disconnected |
- HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the engine switch on (ACC or IG), this code is stored.
INSPECTION PROCEDURE
| 1.CHECK MULTI-DISPLAY POWER SOURCE CIRCUIT |
If the power source circuit is operating normally, proceed to the next step.
| NEXT | |
| 2.CHECK AVC-LAN CIRCUIT BETWEEN TELEVISION CAMERA ECU AND MULTI-DISPLAY |
If the AVC-LAN circuit is operating normally, proceed to the next step.
| NEXT | |
| 3.CHECK TELEVISION CAMERA ECU POWER SOURCE CIRCUIT |
If the power source circuit is operating normally, proceed to the next step.
| NEXT | ||
| ||