Dtc 01-E2 On / Off Indication Parameter Error (Dsp Amp)
DESCRIPTION
INSPECTION PROCEDURE
CHECK RADIO RECEIVER ASSEMBLY
DTC 01-E2 ON / OFF Indication Parameter Error (DSP AMP) |
DESCRIPTION
DTC No.
| DTC Detection Condition
| Trouble Area
|
01-E2
| When command for ON / OFF control from master device has problem
| Radio receiver assembly
|
INSPECTION PROCEDURE
| 1.CHECK RADIO RECEIVER ASSEMBLY |
Check that the malfunction disappears when the radio receiver assembly is replaced with a normal one.
- OK:
- Malfunction disappears.
| | REPLACE RADIO RECEIVER ASSEMBLY |
|
|
| NG |
|
|
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|