Entry And Start System Entry Interior Alarm Does Not Sound
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
PERFORM ACTIVE TEST (COMBINATION METER)
ENTRY AND START SYSTEM - Entry Interior Alarm does not Sound |
DESCRIPTION
Each of the entry and start system's warnings uses the key reminder warning buzzer to alert the driver.The combination meter repeatedly sounds the key reminder warning buzzer when one of the following occurs: 1) the activation conditions for the entry and start system warning is met, or 2) the certification ECU assembly sends a key reminder warning buzzer signal via the BEAN line to the combination meter.
WIRING DIAGRAM
INSPECTION PROCEDURE
- HINT:
- The entry and start system is part of the large-scale body multiplex communication system. The first step in any repair is to confirm the proper operation of the multiplex communication system. Perform the troubleshooting after proper operation of the multiplex communication has been verified.
1.PERFORM ACTIVE TEST (COMBINATION METER) |
Select the Active Test, use the intelligent tester to generate a control command, and then check that the meter operates.
Meter ECU:Item
| Test Details
| Diagnostic Note
|
Key Remind Buzzer
| Key reminder buzzer ON / OFF
| -
|
- OK:
- Key reminder buzzer sounds.
OK |
|
|
|
REPLACE CERTIFICATION ECU ASSEMBLY |
|