Entry And Start System Entry Lock And Unlock Functions Do Not Operate On All Doors
DESCRIPTION
INSPECTION PROCEDURE
CHECK ALL DOOR ENTRY LOCK AND UNLOCK OPERATION
CHECK WIRELESS DOOR LOCK AND UNLOCK OPERATION
CHECK OPERATION OF KEY
CHECK MANUAL DOOR LOCK OPERATION
READ DATA LIST (DOOR COURTESY SWITCH)
ENTRY AND START SYSTEM - Entry Lock and Unlock Functions do not Operate on All Doors |
DESCRIPTION
When the key cancel function is ON, all entry functions will stop operating. If the key cancel function is operated but all entry functions stop operating, one of the following is malfunctioning: 1) key cancel function, 2) certification ECU, or 3) wire harness.
INSPECTION PROCEDURE
1.CHECK ALL DOOR ENTRY LOCK AND UNLOCK OPERATION |
Check that the all door entry lock and unlock functions operate normally.
Result:Result
| Proceed to
|
Entry lock and unlock functions do not operate
| A
|
Entry lock function does not operate
| B
|
- HINT:
- If the entry lock and unlock functions do not operate for a certain door, refer to the problem symptoms table.
2.CHECK WIRELESS DOOR LOCK AND UNLOCK OPERATION |
Check that the wireless door lock and unlock functions operate normally.
- OK:
- Wireless door lock and unlock functions operate normally.
| GO TO WIRELESS DOOR LOCK CONTROL FUNCTION |
|
|
After replacing the key with a normal one, check that the entry lock and unlock functions operate normally.
- OK:
- Entry lock and unlock functions operate normally.
| REPLACE CERTIFICATION ECU ASSEMBLY |
|
|
4.CHECK MANUAL DOOR LOCK OPERATION |
Check that the manual door lock function operates normally.
- OK:
- Manual door lock function operates normally.
| GO TO POWER DOOR LOCK CONTROL SYSTEM |
|
|
5.READ DATA LIST (DOOR COURTESY SWITCH) |
Check the Data List for proper functioning of each door courtesy switch.
Multiplex network master switch assembly:Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Courtesy SW
| Courtesy switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
Multiplex network door ECU front LH (RHD):Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Courtesy SW
| Courtesy switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
Multiplex network door ECU front RH (LHD):Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Courtesy SW
| Courtesy switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
Multiplex network door ECU rear LH:Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Courtesy SW
| Courtesy switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
Multiplex network door ECU rear RH:Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Courtesy SW
| Courtesy switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
Multiplex network rear ECU:Item
| Measurement Item / Range (Display)
| Normal Condition
| Diagnostic Note
|
Lugg Courtesy SW
| Luggage compartment door switch / ON or OFF
| ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
| -
|
- OK:
- ON (door courtesy switch is pushed) appears on the screen.
OK |
|
|
|
REPLACE COWL SIDE JUNCTION BLOCK LH ASSEMBLY |
|