Wiper And Washer System Fail-Safe Chart

When the wiper switch is in any position other than "OFF" and the blades are frozen, a malfunction is detected by the passenger side junction block and the wiper operation is stopped.

HINT:

Recovery condition: Engine switch off.

When the rain sensor overheats and the front wiper is in the HI operation mode, the front wiper system is changed to the LO operation mode.

HINT:

Recovery condition: Engine switch off or wiper operation signal is not INT and LO.

When the cowl side junction block ECU LH malfunctions, the front wiper system can be set to the HI operation mode with the combination switch only.

HINT:

Recovery condition: Cowl side junction block ECU LH returns to normal.