Rear Combination Light Assembly On-Vehicle Inspection

Disconnect the Z1 connector.

Connect the voltmeter's positive (+) lead to terminal Z1-7 and the negative (-) lead to terminal Z1-6.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
Z1-7 (STP) - Z1-6 (E)	Brake pedal released	Below 1 V
Z1-7 (STP) - Z1-6 (E)	Brake pedal depressed	10 to 14 V

Connect the voltmeter's positive (+) lead to terminal Z1-5 and the negative (-) lead to terminal Z1-6.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
Z1-5 (TL) - Z1-6 (E)	Dimmer switch OFF	Below 1 V
Z1-5 (TL) - Z1-6 (E)	Dimmer switch ON	10 to 14 V

Disconnect the Z3 connector.

Connect the voltmeter's positive (+) lead to terminal Z3-2 and the negative (-) lead to terminal Z3-6.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
Z3-2 (STP) - Z3-6 (E)	Brake pedal released	Below 1 V
Z3-2 (STP) - Z3-6 (E)	Brake pedal depressed	10 to 14 V

Connect the voltmeter's positive (+) lead to terminal Z3-5 and the negative (-) lead to terminal Z3-6.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
Z3-5 (TL) - Z3-6 (E)	Dimmer switch OFF	Below 1 V
Z3-5 (TL) - Z3-6 (E)	Dimmer switch ON	10 to 14 V

Disconnect the a2 connector.

Connect the voltmeter's positive (+) lead to terminal a2-2 and the negative (-) lead to terminal a2-4.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
a2-2 (B) - a2-4 (E)	Dimmer switch ON	10 to 14 V
a2-2 (B) - a2-4 (E)	Dimmer switch OFF	Below 1 V

Disconnect the a9 connector.

Connect the voltmeter's positive (+) lead to terminal a9-2 and the negative (-) lead to terminal a9-4.

Measure the voltage of the connector.

Standard voltage:

Tester Connection	Condition	Specified Condition
a9-2 (B) - a9-4 (E)	Dimmer switch ON	10 to 14 V
a9-2 (B) - a9-4 (E)	Dimmer switch OFF	Below 1 V