Dtc P1631 Communication Error From Ecm To Vsc
DESCRIPTION
INSPECTION PROCEDURE
DTC P1631 Communication Error from ECM to VSC |
DTC U0100 Lost Communication with ECM/PCM "A" |
DESCRIPTION
The ECM sends signals such as A/T information signals, dynamic radar cruise control operation signals, brake operation demand signals, buzzer operation demand signals and low speed mode signals, etc., to the skid control ECU when the dynamic radar cruise control is in operation. The ECM is the only component that has a function to record and output the DTCs in the dynamic radar cruise control system. Therefore if the skid control ECU detects a communication error from the ECM, it sends the malfunction signal back to the ECM.DTC No.
| DTC Detection Condition
| Trouble Area
|
P1631
| While dynamic radar cruise control is either preparing for operation or operating, if ECM continuously receives logical error signal from skid control ECU for certain amount of time, ECM records logical error code
| - Communication circuit
- ECM
- ABS & traction actuator (Skid control ECU)
|
U0100
| While dynamic radar cruise control is either preparing for operation or operating, if ECM continuously receives communication cut off signal from ABS & traction actuator (skid control ECU) for certain amount of time, ECM records communication cut off code
| - Communication circuit
- ECM
- ABS & traction actuator (Skid control ECU)
|
INSPECTION PROCEDURE
- HINT:
- This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.
| 1.GO TO CAN COMMUNICATION SYSTEM |
Refer to how to proceed with troubleshooting (Click here).