Driver Side Knee Airbag Assembly -- Installation |
| 1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY |
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
 |
Install the driver side knee airbag assembly with the 4 bolts.
- Torque:
- 10 N*m{102 kgf*cm, 7 ft.*lbf}
| 2. INSTALL INSTRUMENT PANEL SAFETY NO.1 PAD SUB-ASSEMBLY |
 |
Install the hood lock control cable to the safety pad.
Attach the 8 clips and claw to install the safety pad.
| 3. INSTALL INSTRUMENT PANEL UNDER NO.1 COVER SUB-ASSEMBLY |
 |
Connect the connectors.
Attach the 2 claws to install the under cover.
Install the 2 screws.
| 4. INSTALL INSTRUMENT SIDE PANEL |
 |
Attach the 2 claws and 4 clips to install the side panel.
| 5. INSTALL INSTRUMENT PANEL FINISH PANEL END |
 |
Attach the 4 clips and 3 claws to install the finish panel end.
Install the screw.
| 6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY |
 |
Connect the connector.
Attach the 9 clips to install the ash receptacle.
Install the shift lever knob and twist it in the direction indicated by the arrow.
 |
| 7. INSTALL CONSOLE UPPER PANEL GARNISH FRONT |
Attach the claws to install the garnish.
| 8. INSTALL FRONT DOOR OPENING TRIM COVER |
Attach the 3 claws to install the trim cover.
Pull out the folded lip of the weatherstrip.
| 9. INSTALL FRONT DOOR SCUFF PLATE |
 |
Attach the 5 claws to install the scuff plate.
Pull out the folded lip of the weatherstrip.
| 10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 11. PERFORM INITIALIZATION |
| 12. INSPECT SRS WARNING LIGHT |