INSPECT CANISTER

CLEAN FILTER IN CANISTER

Visually check the canister for cracks or damage.

Text in Illustration

*1	Port A
*2	Port B
*3	Port C
	Air

Blow compressed air of 4.9 kPa (50 gf/cm², 0.71 psi) into port A and check that air flows without resistance from port B and port C.

If the result is not as specified, replace the canister.

Apply a vacuum of 1.96 kPa (20 gf/cm², 0.28 psi) to port A. Check that the vacuum does not decrease when ports B and C are closed, and check that the vacuum does not decrease when port B is released.

If the result is not as specified, replace the canister.

Clean the filter by blowing compressed air of 4.9 kPa (50 gf/cm², 0.71 psi) into port A while holding port B closed.

Text in Illustration

*1	Port A
*2	Port B
	Air

• NOTICE:

• Do not attempt to wash the canister.