Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE EMISSION CONTROL
PCV VALVE - INSTALLATION
| 1. INSTALL PCV VALVE SUB-ASSEMBLY |
Apply a light coat of engine oil to the O-ring.
| *1 | O-ring |
- HINT:
When reusing the PCV valve, inspect the O-ring.
If the O-ring has scratches or cuts, replace the PCV valve.
Using a 22 mm ball joint lock nut wrench, install the PCV valve sub-assembly.
- Torque:
- 3.5 N*m{ 36 kgf*cm, 31 in.*lbf}
- NOTICE:
- Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench ().
| 2. INSTALL PCV HOSE |
Connect the PCV valve hose to the valve.
Secure the hose with the clamp.
| *a | Upper Side |
| *b | 5 to 10 mm (0.197 to 0.394 in.) |
- HINT:
- Make sure the direction of the hose clamp is as shown in the illustration.
| 3. INSTALL NO. 3 ENGINE COVER |
Install the No. 3 engine cover.
 | Engine Front |
- HINT:
- Position the No. 3 engine cover so that the arrow mark faces the front of the engine and install it.
| 4. INSTALL NO. 4 ENGINE COVER |
Install the No. 4 engine cover.
| Engine Front |
- HINT:
- Position the No. 4 engine cover so that the arrow mark faces the front of the engine and install it.
| 5. INSTALL INTAKE MANIFOLD |
()