Dtc B2621 Communication Interruption

Steering. Lexus Gs430, Gs300. Uzs190 Grs190
Steering Column. Lexus Gs430, Gs300. Uzs190 Grs190

DESCRIPTION

INSPECTION PROCEDURE

CHECK OTHER DTC OUTPUT

READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - BODY ECU)

READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - DRIVER SEAT ECU)

READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - COMBINATION SWITCH ECU)

READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - POWER SOURCE CONTROL ECU)

DTC B2621 Communication Interruption


DESCRIPTION

The multiplex tilt & telescopic ECU forms a network with the ECUs of other systems through the communication bus. Each ECU informs the other ECUs that it is connected to the network by outputting a specified signal (periodical signal) onto the communication bus on a regular schedule. The multiplex tilt & telescopic ECU detects the connection of each ECU based on the signal.

DTC No.
Detection Item
Trouble Area
B2621
Periodical signal from the specified ECU has stopped.
  1. Multiplex communication system
  2. Cowl side J/B RH (Body ECU)
  3. Position control ECU & switch assembly (Driver seat ECU)
  4. Windshield wiper switch assembly (Combination switch ECU)
  5. Power source control ECU
  6. Multiplex tilt & telescopic ECU

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT

  1. Check if DTC B1200, B1210, B1272 or B1278 is output.

    Result:

    DTC Condition
    		Proceed to
    No output
    		A
    B1200, B1210, B1272 or B1278 is output
    		B
    HINT:
    1. If any other codes besides B2621 are output, perform troubleshooting for those DTCs first.
    2. DTC B1200 indicates a body ECU communication stop malfunction for the multiplex communication system.
    3. DTC B1210 indicates a power source control ECU communication stop malfunction for the multiplex communication system.
    4. DTC B1272 indicates a power seat ECU communication stop malfunction for the multiplex communication system.
    5. DTC B1278 indicates a combination switch ECU communication stop malfunction for the multiplex communication system.


B
REPLACE CIRCUIT INDICATED BY OUTPUT CODE
A


2.READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - BODY ECU)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG) and turn the intelligent tester on.

  1. Select "Tilt & Telescopic".

  1. Select "Receive from Body" from data list.

  1. Check the signal communication state of the body ECU on the tester screen.

    Item
    		Measurement Item/Range (Display)
    		Normal Condition
    Receive from Body
    		Communication state of body ECU signal/OK or Interruption
    		OK: Communication is normal
    Interruption: Communication is interrupted

    OK:
    "OK" is displayed.


NG
REPLACE COWL SIDE J/B RH
OK


3.READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - DRIVER SEAT ECU)

  1. Select "Receive from Seat ECU" from data list.

  1. Check the signal communication state of the driver seat ECU on the tester screen.

    Item
    		Measurement Item/Range (Display)
    		Normal Condition
    Receive from Seat ECU
    		Communication state of seat ECU signal/OK or Interruption
    		OK: Communication is normal
    Interruption: Communication is interrupted

    OK:
    "OK" is displayed.


NG
REPLACE POSITION CONTROL ECU & SWITCH ASSEMBLY (DRIVER SEAT ECU)
OK


4.READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - COMBINATION SWITCH ECU)

  1. Select "Receive from Combi" from data list.

  1. Check the signal communication state of the combination switch ECU on the tester screen.

    Item
    		Measurement Item/Range (Display)
    		Normal Condition
    Receive from Combi
    		Communication state of combination switch ECU signal/OK or Interruption
    		OK: Communication is normal
    Interruption: Communication is interrupted

    OK:
    "OK" is displayed.


NG
REPLACE WINDSHIELD WIPER SWITCH ASSEMBLY (COMBINATION SWITCH ECU)
OK


5.READ VALUE ON INTELLIGENT TESTER (MULTIPLEX TILT & TELESCOPIC ECU - POWER SOURCE CONTROL ECU)

  1. Select "Power ECU Info" from data list.

  1. Check the signal communication state of the power source control ECU on the tester screen.

    Item
    		Measurement Item/Range (Display)
    		Normal Condition
    Power ECU Info
    		Communication state of power source control ECU signal/OK or Interruption
    		OK: Communication is normal
    Interruption: Communication is interrupted

    OK:
    "OK" is displayed.


NG
REPLACE POWER SOURCE CONTROL ECU
OK

REPLACE MULTIPLEX TILT & TELESCOPIC ECU