Suspension & Axle. Lexus Gs430, Gs300. Uzs190 Grs190
Suspension. Lexus Gs430, Gs300. Uzs190 Grs190
Rear Suspension No. 1 Arm -- Installation |
| 1. TEMPORARILY TIGHTEN REAR SUSPENSION NO. 1 ARM |
Temporarily install the rear suspension No.1 arm with the 2 bolts and 2 nuts.
 |
| 2. STABILIZE SUSPENSION |
Jack up the axle carrier, with a wooden block placed between the jack and axle carrier, to apply load to the rear suspension so that the rear drive shaft assembly becomes level.
 |
| 3. FULLY TIGHTEN REAR SUSPENSION NO. 1 ARM |
Fully tighten the 2 bolts.
- Torque:
- Bolt A:
- 95 N*m{970 kgf*cm, 70 ft.*lbf}
- Bolt B:
- 100 N*m{1,020 kgf*cm, 74 ft.*lbf}
- NOTICE:
- Turn the bolt while holding the nut.
 |
| 4. INSTALL REAR FLOOR SIDE MEMBER COVER |
Install the rear floor side member cover with the 2 screws.
 |
| 5. INSTALL DIFFERENTIAL SUPPORT NO.2 PROTECTOR |
Install the differential No.2 support protector with the 2 nuts.
 |
| 6. INSTALL REAR WHEEL |
- Torque:
- 103 N*m{1,050 kgf*cm, 76 ft.*lbf}
| 7. INSPECT AND ADJUST REAR WHEEL ALIGNMENT |