Steering Knuckle Installation

Install the steering knuckle to the upper suspension arm with a nut and new clip.

Torque:

87 N*m{887 kgf*cm, 64 ft.*lbf}

NOTICE:

If the holes for the clip are not aligned, tighten the nut up to another 60°.

Install the lower ball joint to the steering knuckle with the 2 bolts.

Torque:

120 N*m{1220 kgf*cm, 89 ft.*lbf}

Install the front axle hub sub-assembly and front disc brake dust cover with the 4 bolts.

Torque:

69 N*m{700 kgf*cm, 51 ft.*lbf}

Install the brake caliper assembly to the steering knuckle with the 2 bolts.

Torque:

78 N*m{795 kgf*cm, 58 ft.*lbf}

NOTICE:

1. Do not twist the front brake hose when installing the front disc brake caliper.
   
2. Make sure that there are no foreign objects or damage to the threads of the bolts.
   
3. Do not overtighten the bolts because the steering knuckle is made of aluminum and may be damaged.
   

Connect the speed sensor connector to the speed sensor front.

NOTICE:

Do not twist the sensor wire.

Align the matchmarks, and install the front disc.

HINT:

When replacing the disc with a new one, select the installation position where the front disc has the minimum runout.