Rear Propeller Shaft Assembly (For 3Gr-Fse) Removal

Drive Line. Lexus Gs430, Gs300. Uzs190 Grs190
Propeller Shaft. Lexus Gs430, Gs300. Uzs190 Grs190

  1. REMOVE EXHAUST PIPE ASSEMBLY FRONT

  2. REMOVE FRONT FLOOR HEAT INSULATOR NO.1

  3. REMOVE REAR PROPELLER SHAFT ASSEMBLY

Rear Propeller Shaft Assembly (For 3Gr-Fse) -- Removal



1. REMOVE EXHAUST PIPE ASSEMBLY FRONT
(Click here)


2. REMOVE FRONT FLOOR HEAT INSULATOR NO.1

  1. Remove the 4 nuts, grommet and front floor heat insulator No.1.



3. REMOVE REAR PROPELLER SHAFT ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190.Propeller Shaft.Propeller Shaft System.Rear Propeller Shaft Assembly (For 3Gr-Fse) Removal

  1. Put matchmarks on both flanges.

  1. Remove the 4 nuts, bolts and washers.

    HINT:
    If the flange connection is hard to separate, temporarily tighten one nut only and evenly tap the flange with a brass bar and hammer to separate the propeller shaft assembly from the differential companion flange.


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 2 bolts, 2 center support bearing washers and center support bearing.



    Lexus Gs430, Gs300. Uzs190 Grs190.Propeller Shaft.Propeller Shaft System.Rear Propeller Shaft Assembly (For 3Gr-Fse) Removal

  1. Insert SST in the transmission to prevent oil leakage.

    SST
    09325-40010
    NOTICE:
    Be careful not to damage the oil seal.