Shift Lock System On-Vehicle Inspection

Check shift lock operation.

1. Move the shift lever to the P position.
   

2. Turn the engine switch off.
   

3. Check that the shift lever cannot be moved to any position other than P.
   

4. Turn the engine switch on (IG), depress the brake pedal and check that the shift lever can be moved to another position.
   If the operation cannot be done as specified, inspect the shift lock control unit.
   

Check shift lock release button operation.

1. Using a screwdriver, remove the shift lock release cover.
   

2. When operating the shift lever with the shift lock release button pressed, check that the lever can be moved to any position other than P.
   If the operation cannot be done as specified, check the shift lever assembly installation condition.
   

Inspect the shift lock control unit assembly.

1. Measure the voltage according to the value(s) in the table below.
   

   HINT:

   Do not disconnect the shift lock control unit assembly connector.

   
   

   Terminal	Measuring Condition	Voltage (V)
   2 (STP) - 4 (E)	Depress brake pedal	10 to 14
   2 (STP) - 4 (E)	Release brake pedal	Below 1
   1 (IG) - 4 (E)	Engine switch on (IG)	10 to 14
   1 (IG) - 4 (E)	Engine switch off	Below 1





2. Measure the resistance according to the value in the table below.
   

   HINT:

   Do not disconnect the shift lock control unit assembly connector.

   If the result is not as specified, replace the shift lever assembly.

   
   

   Terminal	Measuring Condition	Specified Value
   4 (E) - Body ground	Always	Below 1 Ω