Transmission. Lexus Gs430, Gs300. Uzs190 Grs190
A761E Automatic Transmission. Lexus Gs430, Gs300. Uzs190 Grs190
Electronic Controlled Automatic Transmission System -- Problem Symptoms Table |
- HINT:
- If a normal code is displayed during the diagnostic trouble code check although the trouble still occurs, check the electrical circuits for each symptom in the order given in the charts on the following pages and proceed to the page given for troubleshooting.
- The Matrix Chart is divided into 2 chapters.
Refer to the table below when the trouble cause is considered to be electrical.If the instruction "Proceed to next circuit inspection shown on matrix chart" is given in the flow chart of each circuit, proceed to the circuit with the next highest number in the table to continue the check.If the trouble still occurs even though there are no abnormalities in any of the other circuits, check and replace the ECM.
Symptom | Suspected area | See page |
No up-shift (1st -> 2nd) | 1. Shift solenoid valve (S1) circuit *1 | Click here |
2. ECM | Click here | |
No up-shift (2nd -> 3rd) | 1. Shift solenoid valve (S2) circuit *1 | Click here |
2. ECM | Click here | |
No up-shift (3rd -> 4th) | 1. Shift solenoid valve (S3) circuit *1 | Click here |
2. Engine coolant temp. sensor circuit *1 | Click here | |
3. ECM | Click here | |
No up-shift (4th -> 5th) | 1. Shift solenoid valve (S4) circuit *1 | Click here |
2. Shift solenoid valve (SR) circuit *1 | Click here | |
3. Shift solenoid valve (SL1) circuit *1 | Click here | |
4. Shift solenoid valve (SL2) circuit *1 | Click here | |
5. ECM | Click here | |
No up-shift (5th -> 6th) | 1. Park/neutral position switch circuit *1 | Click here |
2. Engine coolant temp. sensor circuit *1 | Click here | |
3. Shift solenoid valve (S2) circuit *1 | Click here | |
4. ECM | Click here | |
No down-shift (6th -> 5th) | 1. Park/neutral position switch circuit *1 | Click here |
2. Shift solenoid valve (S2) circuit *1 | Click here | |
3. ECM | Click here | |
No down-shift (5th -> 4th) | 1. Shift solenoid valve (S4) circuit *1 | Click here |
2. Shift solenoid valve (SR) circuit *1 | Click here | |
3. Shift solenoid valve (SL1) circuit *1 | Click here | |
4. Shift solenoid valve (SL2) circuit *1 | Click here | |
5. ECM | Click here | |
No down-shift (4th -> 3rd) | 1. Shift solenoid valve (S3) circuit *1 | Click here |
2. ECM | Click here | |
No down-shift (3rd -> 2nd) | 1. Shift solenoid valve (S2) circuit *1 | Click here |
2. ECM | Click here | |
No down-shift (2nd -> 1st) | 1. Shift solenoid valve (S1) circuit *1 | Click here |
2. ECM | Click here | |
No lock-up or No lock-up off | 1. Shift solenoid valve (SLU) circuit *1 | Click here |
2. Stop light switch circuit *1 | Click here | |
3. ECM | Click here | |
No lock-up | 1. Shift solenoid valve (SLU) circuit *1 | Click here |
2. Engine coolant temp. sensor circuit *1 | Click here | |
3. Stop light switch circuit *1 | Click here | |
4. Speed sensor NT circuit *1 | Click here | |
5. ECM | Click here | |
No lock-up off | 1. Shift solenoid valve (SLU) circuit *1 | Click here |
2. ECM | Click here | |
Shift point too high or too low | 1. Shift solenoid valve (SLT) circuit *1 | Click here |
2. Speed sensor NT circuit *1 | Click here | |
3. Speed sensor SP2 circuit *1 | Click here | |
4. Throttle position sensor circuit *1 | Click here | |
5. Pattern select (PWR) switch circuit | Click here | |
6. ATF temperature sensor circuit *1 | Click here | |
7. ECM | Click here | |
Up-shift to 4th from 3rd while engine is cold | 1. Engine coolant temp. sensor circuit *1 | Click here |
2. ECM | Click here | |
Up-shift to 5th from 4th while engine is cold | 1. Engine coolant temp. sensor circuit *1 | Click here |
2. ECM | Click here | |
No gear change by shifting into "+" or "-" while the shifting lever is in the S position | 1. Transmission control switch circuit | Click here |
2. ECM | Click here | |
Harsh engagement (N -> D) | 1. Shift solenoid valve (SLT) circuit *1 | Click here |
2. Speed sensor NT circuit *1 | Click here | |
3. ECM | Click here | |
Harsh engagement (Lock-up) | 1. Speed sensor NT circuit *1 | Click here |
2. Speed sensor SP2 circuit *1 | Click here | |
3. Shift solenoid valve (SLU) circuit *1 | Click here | |
4. ECM | Click here | |
Harsh engagement (Any driving position) | 1. Throttle position sensor circuit *1 | Click here |
2. Shift solenoid valve (SL1) circuit *1 | Click here | |
3. Shift solenoid valve (SL2) circuit *1 | Click here | |
4. Shift solenoid valve (SLU) circuit *1 | Click here | |
5. Shift solenoid valve (SLT) circuit *1 | Click here | |
6. Speed sensor NT circuit *1 | Click here | |
7. ECM | Click here | |
Poor acceleration | 1. Shift solenoid valve (SLT) circuit *1 | Click here |
2. Pattern select (SNOW) switch circuit *2 | Click here | |
3. ECM | Click here | |
No engine brake | ECM | Click here |
No kick-down | 1. Kick-down switch cricuit *3 | Click here |
2. ECM | Click here | |
Engine stalls when starting off or stopping | 1. Shift solenoid valve (SLU) circuit *1 | Click here |
2. ECM | Click here | |
ECT SNOW does not operate *2 | 1. Shift solenoid valve (SLT) circuit *1 | Click here |
2. Pattern select (SNOW) switch circuit | Click here | |
3. ECM | Click here | |
Malfunction in shifting | 1. Park/neutral position switch circuit *1 | Click here |
2. Transmission control switch circuit | Click here | |
3. ECM | Click here | |
Harsh engagement (1st -> 2nd -> 3rd -> 4th -> 5th) | Shift solenoid valve (SR) circuit *1 | Click here |
Slip or shudder (5th -> 6th and 6th -> 5th) | Shift solenoid valve (SR) circuit *1 | Click here |
- HINT:
- *1: When the circuit on which mark *1 is attached is a malfunction, DTC could be output.
- *2: w/ Snow mode switch
- *3: Europe
Symptom | Suspected area | See page |
Vehicle does not move in any forward position and reverse positions | 1. Transmission control rod | Click here |
2. Manual valve | Click here | |
3. Parking lock pawl | Click here | |
4. Rear planetary gear unit | Click here | |
5. Torque converter clutch | Click here | |
Vehicle does not move in R position | 1. Valve body assembly | Click here |
2. Brake No.4 (B4) | Click here | |
No up-shift (1st -> 2nd) | 1. Valve body assembly | Click here |
2. Brake No.3 (B3) | Click here | |
3. One-way clutch No.1 (F1) | Click here | |
4. One-way clutch No.2 (F2) | Click here | |
No up-shift (2nd -> 3rd) | 1. Valve body assembly | Click here |
2. Clutch No.3 (C3) | Click here | |
No up-shift (3rd -> 4th) | 1. Valve body assembly | Click here |
2. Clutch No.2 (C2) | Click here | |
No up-shift (4th -> 5th) | 1. Valve body assembly | Click here |
2. Brake No.1 (B1) | Click here | |
No up-shift (5th -> 6th) | 1. Valve body assembly | Click here |
2. Brake No.2 (B2) | Click here | |
No down-shift (6th -> 5th) | Valve body assembly | Click here |
No down-shift (5th -> 4th) | Valve body assembly | Click here |
No down-shift (4th -> 3rd) | Valve body assembly | Click here |
No down-shift (3rd -> 2nd) | Valve body assembly | Click here |
No down-shift (2nd -> 1st) | Valve body assembly | Click here |
No lock-up or No lock-up off | 1. Valve body assembly | Click here |
2. Torque converter clutch | Click here | |
Harsh engagement (N -> D) | 1. Valve body assembly | Click here |
2. C1 accumulator | Click here | |
3. Clutch No.1 (C1) | Click here | |
4. One-way clutch No.3 (F3) | Click here | |
5. One-way clutch No.4 (F4) | Click here | |
Harsh engagement (Lock-up) | 1. Valve body assembly | Click here |
2. Torque converter clutch | Click here | |
Harsh engagement (N -> R) | 1. Valve body assembly | Click here |
2. C3 accumulator | Click here | |
3. Clutch No.3 (C3) | Click here | |
4. Brake No.4 (B4) | Click here | |
5. One-way clutch No.1 (F1) | Click here | |
Harsh engagement (1st -> 2nd -> 3rd -> 4th -> 5th -> 6th) | Valve body assembly | Click here |
Harsh engagement (1st -> 2nd) | 1. Valve body assembly | Click here |
2. B3 accumulator | Click here | |
3. Brake No.3 (B3) | Click here | |
4. One-way clutch No.1 (F1) | Click here | |
5. One-way clutch No.2 (F2) | Click here | |
Harsh engagement (2nd -> 3rd) | 1. Valve body assembly | Click here |
2. C3 accumulator | Click here | |
3. Clutch No.3 (C3) | Click here | |
Harsh engagement (3rd -> 4th) | 1. Valve body assembly | Click here |
2. C2 accumulator | Click here | |
3. Clutch No.2 (C2) | Click here | |
Harsh engagement (4th -> 5th) | 1. Valve body assembly | Click here |
2. B1 accumulator | Click here | |
3. Brake No.1 (B1) | Click here | |
Harsh engagement (5th -> 6th) | 1. Valve body assembly | Click here |
2. B2 accumulator | Click here | |
3. Brake No.2 (B2) | Click here | |
Harsh engagement (6th -> 5th) | 1. Valve body assembly | Click here |
2. C3 accumulator | Click here | |
3. Clutch No.3 (C3) | Click here | |
Slip or shudder (Forward and reverse: After warm-up) | 1. Valve body assembly | Click here |
2. Oil strainer | Click here | |
3. One-way clutch No.1 (F1) | Click here | |
4. Clutch No.3 (C3) | Click here | |
5. Torque converter clutch | Click here | |
Slip or shudder (Particular position: Just after engine starts) | Torque converter clutch | Click here |
Slip or shudder (R position) | 1. Brake No.4 (B4) | Click here |
2. One-way clutch No.1 (F1) | Click here | |
3. Clutch No.3 (C3) | Click here | |
Slip or shudder (1st) | 1. Clutch No.1 (C1) | Click here |
2. One-way clutch No.3 (F3) | Click here | |
3. One-way clutch No.4 (F4) | Click here | |
Slip or shudder (2nd) | 1. Clutch No.1 (C1) | Click here |
2. Brake No.3 (B3) | Click here | |
3. One-way clutch No.1 (F1) | Click here | |
4. One-way clutch No.2 (F2) | Click here | |
5. One-way clutch No.4 (F4) | Click here | |
Slip or shudder (3rd) | 1. Clutch No.1 (C1) | Click here |
2. Clutch No.3 (C3) | Click here | |
3. One-way clutch No.1 (F1) | Click here | |
4. One-way clutch No.4 (F4) | Click here | |
Slip or shudder (4th) | 1. Clutch No.1 (C1) | Click here |
2. Clutch No.2 (C2) | Click here | |
3. One-way clutch No.4 (F4) | Click here | |
Slip or shudder (5th) | 1. Clutch No.2 (C2) | Click here |
2. Clutch No.3 (C3) | Click here | |
3. Brake No.1 (B1) | Click here | |
Slip or shudder (6th) | 1. Clutch No.2 (C2) | Click here |
2. Brake No.2 (B2) | Click here | |
No engine braking (1st +- 4th: S position) | Clutch No.4 (C4) | Click here |
No engine braking (1st: 1 position) | 1. Valve body assembly | Click here |
2. Brake No.4 (B4) | Click here | |
No engine braking (2nd: 2 position) | 1. Valve body assembly | Click here |
2. Brake No.2 (B2) | Click here | |
No engine braking (3rd: 3 position) | 1. Valve body assembly | Click here |
2. Brake No.1 (B1) | Click here | |
No engine braking (4th: 4 position) | Valve body assembly | Click here |
No kick-down | Valve body assembly | Click here |
Shift point too high or too low | Valve body assembly | Click here |
Poor acceleration (All positions) | 1. Valve body assembly | Click here |
2. Torque converter clutch | Click here | |
Poor acceleration (6th) | 1. Brake No.2 (B2) | Click here |
2. Clutch No.2 (C2) | Click here | |
3. Front planetary gear unit | Click here | |
Engine stalls when starting off or stopping | 1. Valve body assembly | Click here |
2. Torque converter clutch | Click here |