Heated Oxygen Sensor (For Sensor 1) Installation

Using SST, install the sensor.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf}for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf}for use without SST

Connect the sensor connector.

Install the heat insulator with the 2 bolts.

Torque:

18 N*m{184 kgf*cm, 13 ft.*lbf}

Using SST, install the sensor.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf}for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf}for use without SST

Install the sensor wire to the 2 wire clamps.

Connect the connector.

Perform initialization (Click here).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.