Air Fuel Ratio Sensor (For Sensor 1) Installation

Using SST, install the sensor to the exhaust manifold RH.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf}for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf}for use without SST

HINT:

Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

Connect the sensor connector.

Install the battery tray with the 2 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the 2 power steering ECU assembly connectors and securely lock the connectors.

Install the power steering ECU assembly to the battery tray with the 2 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Install the ground cable terminal with bolt (A).

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Install the battery tray support No.1.

Install the battery.

Install the battery insulator.

European models only :

1. Connect the battery thermometer connector.
   

Install the battery clamp with the 2 nuts.

Torque:

2.9 N*m{30 kgf*cm, 26 in.*lbf}

Connect the positive (+) battery cable to the battery.

Torque:

5.6 N*m{57 kgf*cm, 50 in.*lbf}

Connect the negative (-) battery cable to the battery.

Torque:

5.6 N*m{57 kgf*cm, 50 in.*lbf}

Using SST, install the sensor to the exhaust manifold RH.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf}for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf}for use without SST

HINT:

Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

Connect the sensor connector.

Perform initialization procedure (Click here).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.