Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE FUEL
FUEL PUMP - REMOVAL
| 1. REMOVE FUEL TANK SUB-ASSEMBLY |
()
| 2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Set SST on the retainer.
- SST
- 09808-14030
- HINT:
Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.
Install SST while pressing the claws of SST against the retainer (towards the center of SST).
Using SST, loosen the retainer.
- SST
- 09808-14030
- NOTICE:
Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.
While pressing down on SST so that the claws of SST do not slip off the protrusion of the retainer, turn the retainer counterclockwise to loosen it.
- HINT:
- The protrusion of the retainer fit in the ends of SST.
Remove the retainer while holding the fuel suction tube assembly by hand.
Remove the gasket from the fuel tank.