Throttle Body On-Vehicle Inspection

Check the throttle control motor operating sounds.

1. Turn the engine switch on (IG).
   

2. When pressing the accelerator pedal, check the operating sound of the running motor. Make sure that no friction noises emit from the motor.
   If friction noise exists, replace the throttle body.
   

Check the throttle position sensor.

1. Connect the intelligent tester to the DLC3.
   

2. Turn the engine switch on (IG).
   

3. Push the intelligent tester main switch ON.
   

4. Enter the following menus: Powertrain / Engine / Data List / Throttle Sensor Position and Throttle Position Sensor Position #2.
   

5. Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of the "Throttle Sensor Position" is within the specification.
   

   Standard throttle valve opening percentage:

   60% or more
   

   NOTICE:

   When checking the standard throttle valve opening percentage, the shift lever should be in the N position.

   HINT:

   If the percentage is less than 60%, replace the throttle body.