Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE FUEL
FUEL PRESSURE REGULATOR - REMOVAL
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
()
| 2. PRECAUTION |
- NOTICE:
- After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 4. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| *1 | Bracket |
| *2 | Hook |
| *3 | Pin |
| *4 | Grommet |
| 5. REMOVE AIR CLEANER HOSE ASSEMBLY |
Disconnect the vacuum hose and No. 2 ventilation hose.
Loosen the 2 hose clamps.
Remove the air cleaner hose.
| 6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
Disconnect the No. 2 fuel tube from the pressure regulator ().
- CAUTION:
- Put a cloth or equivalent under the pressure regulator.
Disconnect the vacuum sensing hose from the pressure regulator.
Remove the 2 bolts, and pull out the pressure regulator.
Remove the O-ring from the pressure regulator.