Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200
Back Door Garnish (W/O Tire Carrier) -- Installation |
- HINT:
- When installing the back door garnish, heat the vehicle body and back door garnish using a heat light.
- Standard Heating Temperature:
Item Temperature Back Door Garnish 20 to 30°C (68 to 86°F) Vehicle Body 40 to 60°C (104 to 140°F)
- NOTICE:
- Do not heat the back door garnish and vehicle body excessively.
| 1. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body surface.
Wipe off any tape adhesive residue with cleaner.
Install a new back door garnish.
Using a heat light, heat a new back door garnish and the vehicle body surface.
Remove the peeling paper from the face of the back door garnish.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the 4 clips and double-sided tape to install the back door garnish.
- HINT:
- Press the back door garnish firmly to install it.
