Front Door Outside Moulding Reassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD

  2. INSTALL FRONT DOOR NO. 1 OUTSIDE MOULDING PAD LH

  3. INSTALL FRONT DOOR NO. 2 OUTSIDE MOULDING PAD LH

Front Door Outside Moulding -- Reassembly


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD
HINT:
When installing the front door upper outside moulding pad, heat the front door outside moulding using a heat light.
Standard:
Item
Temperature
Front Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the front door outside moulding excessively.

  1. When using a new front door outside moulding:

    1. Clean the surface of a new front door outside moulding.

    2. Using a heat light, heat the front door outside moulding surface.

  1. When reusing the front door outside moulding:

    1. Using a heat light, heat the front door outside moulding surface.

    2. Remove the double-sided tape from the front door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Front Door Outside Moulding Reassembly

  1. Install a new front door upper outside moulding pad.

    1. Remove the peeling paper from the face of a new front door upper outside moulding pad.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the front door upper outside moulding pad with the mark-off line of the front door outside moulding and install it as shown in the illustration.

      HINT:
      Press the front door upper outside moulding pad firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line


2. INSTALL FRONT DOOR NO. 1 OUTSIDE MOULDING PAD LH
HINT:
When installing the front door No. 1 outside moulding pad LH, heat the front door outside moulding using a heat light.
Standard:
Item
Temperature
Front Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the front door outside moulding excessively.

  1. When using a new front door outside moulding:

    1. Clean the surface of a new front door outside moulding.

    2. Using a heat light, heat the front door outside moulding surface.

  1. When reusing the front door outside moulding:

    1. Using a heat light, heat the front door outside moulding surface.

    2. Remove the double-sided tape from the front door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Front Door Outside Moulding Reassembly

  1. Install a new front door No. 1 outside moulding pad LH.

    1. Remove the peeling paper from the face of a new front door No. 1 outside moulding pad LH.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the front door No. 1 outside moulding pad LH with the mark-off line of the front door outside moulding and install it as shown in the illustration.

      HINT:
      Press the front door No. 1 outside moulding pad LH firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line


3. INSTALL FRONT DOOR NO. 2 OUTSIDE MOULDING PAD LH
HINT:
When installing the front door No. 2 outside moulding pad LH, heat the front door outside moulding using a heat light.
Standard:
Item
Temperature
Front Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the front door outside moulding excessively.

  1. When using a new front door outside moulding:

    1. Clean the surface of a new front door outside moulding.

    2. Using a heat light, heat the front door outside moulding surface.

  1. When reusing the front door outside moulding:

    1. Using a heat light, heat the front door outside moulding surface.

    2. Remove the double-sided tape from the front door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Front Door Outside Moulding Reassembly

  1. Install a new front door No. 2 outside moulding pad LH.

    1. Remove the peeling paper from the face of a new front door No. 2 outside moulding pad LH.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the front door No. 2 outside moulding pad LH with the mark-off line of the front door outside moulding and install it as shown in the illustration.

      HINT:
      Press the front door No. 2 outside moulding pad LH firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line