Rear Door Belt Moulding Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY LH

  2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

  3. INSTALL REAR DOOR QUARTER WINDOW GLASS LH

  4. INSTALL REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH

  5. INSTALL REAR DOOR GLASS RUN LH

  6. INSTALL REAR DOOR SERVICE HOLE COVER LH

  7. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH

  8. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  9. INSTALL ASSIST GRIP COVER LH

  10. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY LH

  11. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Rear Door Belt Moulding -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the claw to install the belt moulding.



2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Slide the rear door glass sub-assembly LH as shown in the illustration to install it.



3. INSTALL REAR DOOR QUARTER WINDOW GLASS LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear door quarter window glass LH together with the rear door quarter window weatherstrip LH in the direction indicated by the arrow in the illustration.



4. INSTALL REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH

  1. Install the rear door rear lower window frame sub-assembly LH with the 2 bolts and screw.



5. INSTALL REAR DOOR GLASS RUN LH

  1. Install the rear door glass run LH.



6. INSTALL REAR DOOR SERVICE HOLE COVER LH

  1. Apply butyl tape to the door.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Pass the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH through a new rear door service hole cover LH.

    NOTICE:
    1. When installing the rear door service hole cover LH, pull the links and connectors through the rear door service hole cover LH.
    2. There should be no wrinkles or folds after attaching the rear door service hole cover LH.
    3. After attaching the rear door service hole cover LH, check the sealing quality.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the 3connectors.

  1. Attach the 7clamps.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Belt Moulding Installation

  1. Install the bolt as shown in the illustration.

    Torque:
    8.4 N*m{86 kgf*cm, 74 in.*lbf}


7. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Belt Moulding Installation

  1. Install the rear door inner glass weatherstrip LH to the door panel.



8. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  1. Connect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH to the rear door inside handle sub-assembly LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws and pin.

  1. Attach the 9 clips to install the rear door trim board sub-assembly LH.

  1. Install the 3 screws.



9. INSTALL ASSIST GRIP COVER LH

  1. Attach the 9 claws to install the assist grip cover LH to the rear door trim board sub-assembly LH.



10. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY LH

  1. Connect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the rear door upper armrest base panel assembly LH.



11. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH

  1. Attach the 4 claws to install the rear door inside handle bezel LH.



12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).