Rear Bumper (W/ Pintle Hook) Reassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

  2. INSTALL REAR NO. 2 STEP COVER

  3. INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

  4. INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

  5. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

  6. INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

  7. INSTALL REAR BUMPER ENERGY ABSORBER

  8. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  9. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  10. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

  11. INSTALL NO. 2 FRAME WIRE

Rear Bumper (W/ Pintle Hook) -- Reassembly



1. INSTALL REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

  1. Attach the 3 claws and 2 clips to install the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.

  1. Install the 2 screws.



2. INSTALL REAR NO. 2 STEP COVER

  1. Attach the 10 claws to install the rear No. 2 step cover.



3. INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

  1. Attach the claw to install the reflex reflector assembly LH.

  1. Install the 2 nuts.



4. INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)
HINT:
Use the same procedure described for the LH side.


5. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the claw.

  1. Connector the connectors.

  1. Install the fog light with the 2 nuts.



6. INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)
HINT:
Use the same procedure described for the LH side.


7. INSTALL REAR BUMPER ENERGY ABSORBER

  1. Attach the 8 claws to install the rear bumper energy absorber.



8. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Bumper (W/ Pintle Hook) Reassembly

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.
    2. Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
    HINT:
    The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.



9. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Bumper (W/ Pintle Hook) Reassembly

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.
    2. Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.

  1. Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.



10. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure for all No. 1 ultrasonic sensors.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    NOTICE:
    Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.


11. INSTALL NO. 2 FRAME WIRE

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

    1. Attach the 12 clamps to install the No. 2 frame wire.

    2. Connect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

    1. Attach the 14 clamps to install the No. 2 frame wire.

    2. Connect the 6 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

    1. Attach the 13 clamps to install the No. 2 frame wire.

    2. Connect the 2 connectors.