Rear Bumper (W/ Towing Hitch) Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR BUMPER ARM BRACKET LH

  2. INSTALL REAR BUMPER ARM BRACKET

  3. INSTALL REAR BUMPER NO. 2 REINFORCEMENT

  4. INSTALL REAR BUMPER SIDE SUPPORT LH

  5. INSTALL REAR BUMPER SIDE SUPPORT RH

  6. INSTALL REAR BUMPER UPPER RETAINER LH

  7. INSTALL REAR BUMPER UPPER RETAINER RH

  8. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

  9. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

  10. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

  11. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

  12. INSTALL REAR BUMPER COVER

  13. INSTALL REAR BUMPER NO. 1 PLATE

  14. INSTALL REAR QUARTER PANEL MUDGUARD LH

  15. INSTALL REAR QUARTER PANEL MUDGUARD RH

Rear Bumper (W/ Towing Hitch) -- Installation


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL REAR BUMPER ARM BRACKET LH

  1. Install the rear bumper arm bracket LH with the 2 bolts.

  1. Attach the clamp.



2. INSTALL REAR BUMPER ARM BRACKET

  1. Install the rear bumper arm bracket with the bolt.

    HINT:
    Use the same procedure for both bumper arm brackets.


3. INSTALL REAR BUMPER NO. 2 REINFORCEMENT

  1. Install the rear bumper No. 2 reinforcement with the 2 bolts.



4. INSTALL REAR BUMPER SIDE SUPPORT LH

  1. Attach the 6 claws to install the rear bumper side support LH.

  1. Install the 3 screws.



5. INSTALL REAR BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure described for the LH side.


6. INSTALL REAR BUMPER UPPER RETAINER LH

  1. Attach the 2 clips to install the rear bumper upper retainer LH.



7. INSTALL REAR BUMPER UPPER RETAINER RH
HINT:
Use the same procedure described for the LH side.


8. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
(Click here)


9. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


10. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

  1. Install the No. 2 luggage compartment side cover protector with 2 new grommets.

  1. Install the 2 screws.



11. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
HINT:
Use the same procedure described for the LH side.


12. INSTALL REAR BUMPER COVER

  1. w/ TOYOTA Parking Assist-sensor System:
    Connect the No. 2 frame wire connector.

  1. Attach the 14 claws to install the rear bumper cover.

  1. Install the 7 bolts, 6 screws and 2 clips.

  1. Open the tail gate and install the 4 clips.

  1. Close the tail gate.



13. INSTALL REAR BUMPER NO. 1 PLATE

  1. Attach the 20 claws to install the rear bumper No. 1 plate.



14. INSTALL REAR QUARTER PANEL MUDGUARD LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear quarter panel mudguard LH with the 2 clips.

  1. Using a T30 "TORX" socket, install the 6 screws.



15. INSTALL REAR QUARTER PANEL MUDGUARD RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear quarter panel mudguard RH with the 2 clips.

  1. Using a T30 "TORX" socket, install the 7 screws.