Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE FUEL
FUEL PUMP - INSTALLATION
| 1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.
Install the fuel suction with pump and gauge tube assembly into the fuel tank.
| *1 | Protrusion |
| *2 | Groove |
 | Front |
- NOTICE:
- Be careful not to bend the arm of the fuel sender gauge.
- HINT:
- Align the protrusion of the fuel suction with pump and gauge tube assembly with the groove of the fuel tank.
Put the fuel pump gauge retainer on the fuel tank. While holding the fuel suction with pump and gauge tube assembly, tighten the fuel pump gauge retainer 1 complete turn by hand.
Set SST on the fuel pump gauge retainer.
- SST
- 09808-14030
- HINT:
Hold the fuel suction with pump and gauge tube assembly upright by hand to make sure that the fuel suction tube gasket is not moved out of position.
Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.
Install SST while pressing the claws of SST against the fuel pump gauge retainer (toward the center of SST).
Using SST, tighten the fuel pump gauge retainer until the mark on the fuel pump gauge retainer is within range A on the fuel tank as shown in the illustration.
- SST
- 09808-14030
| *1 | Fuel Tank Side Mark |
| *2 | Fuel Pump Gauge Retainer Side Mark |
- HINT:
- Fit the tips of SST onto the ribs of the fuel pump gauge retainer.
| 2. INSTALL FUEL TANK SUB-ASSEMBLY |
()