Back-Up Light Assembly (For Spare Wheel Carrier) Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR LIGHT ASSEMBLY LH

  2. INSTALL BACK DOOR GARNISH

  3. INSTALL BACK DOOR SIDE GARNISH LH

  4. INSTALL BACK DOOR SIDE GARNISH RH

  5. INSTALL BACK DOOR CENTER GARNISH

Back-Up Light Assembly (For Spare Wheel Carrier) -- Installation


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here ).


1. INSTALL REAR LIGHT ASSEMBLY LH

  1. Attach the pin to set the rear light assembly LH.

  1. Install the 3 nuts.

  1. Connect the connector.



2. INSTALL BACK DOOR GARNISH

  1. Attach the 14 clips to install the back door garnish.



3. INSTALL BACK DOOR SIDE GARNISH LH

  1. Attach the 3 clips and 2 claws to install the back door side garnish LH.



4. INSTALL BACK DOOR SIDE GARNISH RH

  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. w/ Power Back Door:

    1. Attach the clip and 4 claws to install the back door side garnish RH.



5. INSTALL BACK DOOR CENTER GARNISH

  1. Attach the 5 clips and 4 claws to install the center back door garnish.