Rear Combination Light Assembly Reassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

  2. INSTALL REAR TURN SIGNAL LIGHT BULB

  3. INSTALL REAR COMBINATION LIGHT BODY GASKET LH

Rear Combination Light Assembly -- Reassembly


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

  1. Attach the wire harness clamp and connector to install the rear combination light socket and wire sub-assembly LH.



2. INSTALL REAR TURN SIGNAL LIGHT BULB

  1. Install the rear turn signal light bulb to the bulb socket.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Rear Combination Light Assembly Reassembly

  1. Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

    Text in Illustration
    *a
    		Matchmark
    *b
    		Unlock Position Mark
    *c
    		Lock Position Mark


3. INSTALL REAR COMBINATION LIGHT BODY GASKET LH

  1. Install a new rear combination light body gasket LH.