Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE OUTER REAR VIEW MIRROR LH

  2. REMOVE OUTER MIRROR LH

  3. REMOVE OUTER MIRROR COVER LH

  4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

Side Turn Signal Light Assembly (For Outer Rear View Mirror) -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE OUTER REAR VIEW MIRROR LH
(Click here)


2. REMOVE OUTER MIRROR LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a moulding remover, detach the 4 claws and separate the outer mirror LH from the mirror body.

    HINT:
    Apply protective tape to the outer rear mirror LH to prevent it from being damaged.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Blind Monitor System:
    Disconnect the connector and remove the outer mirror LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ EC Mirror:
    Disconnect the connector and remove the outer mirror LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Mirror Heater:
    Disconnect the 2 connectors and remove the outer mirror LH.



3. REMOVE OUTER MIRROR COVER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal
HINT:
Be sure to detach the claws of the outer mirror cover in the order shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

  1. Using 2 screwdrivers, detach the 2 claws.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. Insert a screwdriver into the slot as shown in the illustration and push on the outer mirror body to create a space between the outer mirror body and outer mirror cover.

    NOTICE:
    Be careful not to break the ribs.
    HINT:
    Tape the screwdriver tip before use.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal


    Text in Illustration
    *1
    		Protective Tape
    		*2
    		Rib
    *a
    		Inner Side of Outer Mirror Cover
    		-
    		-


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

  1. Insert a moulding remover into the space made between the outer mirror body and outer mirror cover.

    NOTICE:
    Do not insert the moulding remover more than 4 mm (0.157 in.).
    HINT:
    Tape the moulding remover before use.
    Standard:
    Area
    		Specified Condition
    a
    		4mm
    Text in Illustration
    *1
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

  1. Slide the moulding remover downwards as shown in the illustration to detach the 2 claws.

    NOTICE:
    1. Do not insert the moulding remover more than 4 mm (0.157 in.).
    2. Do not slide the moulding remover past the point approximately 40 mm (1.57 in.) from the bottom edge of the outer mirror cover as the outer mirror body will become damaged.
    Standard:
    Area
    		Specified Condition
    a
    		40mm
    b
    		4mm
    Text in Illustration
    *1
    		Protective Tape

  1. Remove the moulding remover B.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

  1. Apply protective tape to the areas of the body cover and outer mirror cover as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape
    *a
    		Lower Side

  1. Insert a moulding remover B between the outer mirror cover and outer mirror body as shown in the illustration and detach the claw.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Side Turn Signal Light Assembly (For Outer Rear View Mirror) Removal

  1. Using a screwdriver, detach the claw.

    Text in Illustration
    *1
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the outer mirror cover.

    NOTICE:
    When removing the cover, be careful not to damage the side turn signal light assembly or cover.


4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 screws and light.

  1. Disconnect the connector.